9
CONNECTING VARIPUMP 10,000
TO FLEXIBLE HOSE
The stepped hosetail supplied allows connections
to 38mm (1½”), 32mm, 26mm Flexible Hose.
When fitting the hosetail, ensure the flat washer
provided is seated correctly inside the thread
before screwing to the outlet of the pump.
We advise using the largest connection therefore
the smaller sections of the hosetail must be cut off
to ensure sufficient water flow. Once the hosetails
have been trimmed, secure the flexible hose to
using a stainless steel hose clip (not provided).
CONNECTING VARIPUMP 20,000 & 30,000
TO FLEXIBLE HOSE
The stepped hosetail supplied allows connections
to 50mm (2”), 40mm, 32mm Flexible Hose.
When fitting the hosetail, ensure the flat washer
provided is seated correctly inside the thread
before screwing to the outlet of the pump.
We advise using the largest connection therefore
the smaller sections of the hosetail must be cut off
to ensure sufficient water flow. Once the hosetails
have been trimmed, secure the flexible hose to
using a stainless steel hose clip (not provided).
CONNECTING THE VARIPUMP TO FLEXIBLE HOSE
To Next Page
Loading...