4 5
www.evolutionpowertools.com www.evolutionpowertools.com
FR
ES
EN
1.2
This instruction manual was
originally written in English.
(1.3)
IMPORTANT
Please read these operating and safety
instructions carefully and completely.
For your own safety, if you are uncertain
about any aspect of using this equipment
please access the relevant technical helpline,
the number of which can be found on the
Evolution Power Tools website. We operate
several helplines throughout our worldwide
organization, but Technical help is also
available from your supplier.
WEB: www.evolutionpowertools.com
(1.4)
Congratulations on your purchase of an
Evolution Power Tools Machine. Please
complete your product registration ‘online’
as explained in the A4 online guarantee
registration leaflet included with this
machine. You can also scan the QR code
found on the A4 leaflet with a Smart Phone.
This will enable you to validate your
machine’s guarantee period via Evolution’s
website by entering your details and thus
ensure prompt service if ever needed. We
sincerely thank you for selecting a product
from Evolution Power Tools.
EVOLUTION LIMITED GUARANTEE.
Evolution Power Tools reserves the right to
make improvements and modifications to the
product design without prior notice.
Please refer to the guarantee registration leaflet
and/or the packaging for details of the terms
and conditions of the guarantee. The guarantee
below is applicable to machines destined for
the UK mainland market only. Other markets
may have specific requirements, additions or
exclusions applied. Consult your dealer for
details of the guarantee applied in your area/
country. All Evolution guarantees are in addition
to your statutory rights.
(1.5)
Evolution Power Tools will, within the
guarantee period, and from the original date of
purchase, repair or replace any goods found to
be defective in materials or workmanship. This
guarantee is void if the tool being returned
has been used beyond the recommendations
in the Instruction Manual or if the machine
has been damaged by accident, neglect, or
improper service. This guarantee does not
apply to machines and / or components which
have been altered, changed, or modified
in any way, or subjected to use beyond
recommended capacities and specifications.
Electrical components are subject to respective
manufacturers’ warranties. All goods returned
defective shall be returned prepaid freight
to Evolution Power Tools. Evolution Power
Tools reserves the right to repair or replace
it with the same or equivalent item. There
is no warranty – written or verbal – for
consumable accessories such as (following list
not exhaustive) blades, cutters, drills, chisels
or paddles etc. In no event shall Evolution
Power Tools be liable for loss or damage
resulting directly or indirectly from the use
of our merchandise or from any other cause.
Evolution Power Tools is not liable for any
costs incurred on such goods or consequential
damages. No officer, employee or agent of
Evolution Power Tools is authorized to make
oral representations of fitness or to waive any
of the foregoing terms of sale and none shall
be binding on Evolution Power Tools.
Questions relating to this limited
guarantee should be directed to the
company’s head office, or call the
appropriate helpline number.
TABLE OF CONTENTS
English Page 2
Español Página 32
Français Page 64
INTRODUCTION Page 5
Guarantee Page 5
Machine Specifications Page 6
Vibration Page 8
Labels and Symbols Page 9
Intended use of this Power Tool Page 9
Prohibited use of this Power Tool Page 10
SAFETY PRECAUTIONS Page 10
Outdoor Use Page 10
General Power Tool Safety Instructions Page 10
Additional Safety Instructions Page 12
GETTING STARTED Page 15
Unpacking Page 15
Items Supplied Page 15
Additional Accessories Page 16
Machine Overview - EVOMAG28 Page 17
Machine Overview - EVOMAG50 Page 18
Machine Overview - EVOMAG75 Page 19
Assembly and Preparation Page 20
Gear Selection Page 20 + 22
Pre Use Testing Page 22
Installing An Annular Cutter Page 23
Setting Up Page 24
Coolant/Lubricant Delivery Page 24
General Guidance Page 25
Installing A 3 Jaw Chuck Page 25
Tapping Page 27
MAINTENANCE Page 28
Adjusting The Gibs Page 28
DECLARATION OF CONFORMITY Page 30
To Next Page
Loading...
Need help?
General
