11
www.evolutionpowertools.com
EN
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Vacuum can not run No electricity
Make sure electrical outlet has voltage (a qualified
electrician may need to be contacted)
Loss of suction,
wet pick-up
1. Full tank
2. Clogged hose
3. Clogged filter
1. Drain and clean tank
2. Remove hose and clean debris
3. Clean or replace filter
Loss of suction,
dry pick-up
1. Full tank
2. Clogged hose
3. Clogged filter
1. Drain and clean tank
2. Remove hose and clean debris
3. Clean or replace filter
WARNING: To reduce the risk of injury from
moving parts and/or electrical shock, turn
power switch off and disconnect grounded
plug from electrical outlet before performing
troubleshooting checks. Minor problems often
can be fixed without calling customer service.
TROUBLESHOOTING
To Next Page
Loading...
