automatically every time when the out call
fails or be rejected.
Call time display: Display the total call time.
Call time reminder: You can set the call time
reminder mode as Singleor periodic; select
Off to cancel this function.
Answer mode: You can select Answer Mode
Attention: Parts of the functions need
network operator's support.
4. Speed Dial
Setting a phone number which can be called
by long press M1 / M2 .
Select “Menu”, the scroll to “Settings”
function by key “up/down”
Select “Speed dial” and press “OK”, then you
go to M1/M2 setting menu, fill the related
number inside the blank.
You have finished setting M1/M2. After that
you can long press M1
or M2 to call
the related number which setting in M1/M2.
To Next Page
Loading...
