3. Get started
1. Place your phone on a flat surface with a display
facing down and remove the rear cover by sliding it
upwards.
2.
L
ocate the SIM card slot and insert the card with
metal contacts facing down.
3.
I
t is also possible to insert a microSDHC card as well.
Lock it by dragging the metal sheet into the LOCK
position.
4.
I
nsert the battery.
5.
P
ut the rear cover back.
C
harging the Battery
1.
M
ake sure that the battery is inserted in the phone.
2. It is possible to charge the phone while it is on or off.
3.
T
he charging port is located on the bottom side of
the phone.
4. The phone can also be charged directly via the
included 230 V charger with microUSB connector or you
can place the phone into its cradle and then connect to
the charger. Once the battery is fully charged, unplug
the charger from the wall outlet.
To Next Page
Loading...
