customer to protect the appliance from
scratches or other damage. Remove
such before use.
2) Before connecting to the mains,
ensure by visual inspection that the
appliance is intact and no damage has
occurred during transportation.
SERVICE
PUTTING YOUR PHONE INTO
SERVICE
Insert your fingernail into the slot under
the back cover of the phone, remove
the cover and remove the battery.
Insert the SIM card and, if applicable,
the memory card if you have
purchased one. Insert the battery. The
metal contacts of the battery must face
the contacts in the phone. Replace the
rear battery cover.
BATTERY CHARGE
Plug the charger into the USB-C
connector on your mobile phone or
insert your phone into the charging
stand. Charging starts automatically.
The phone can be charged both on
and off. The battery level is indicated
on the phone screen.
SWITCHING YOUR PHONE
ON/OFF
To switch on, hold down the red button
(12) until the phone switches on. (You
may be prompted to enter your PIN if
To Next Page
Loading...
