EasyManua.ls Logo

Evolveo EasyPhone - Commissioning; Battery Charging; Switching On and Off

Evolveo EasyPhone
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
COMMISSIONING
1) Place your phone face down and remove the back cover,
facing up.
2) Locate the space for inserting the SIM card and insert it with
the metal contacts facing down.
3) If you want, you can also insert a microSDHC card into your
phone. Secure it by pulling the metal locking cap to the
LOCK position.
4) Insert the battery into your phone.
5) Close the phone with the back cover.
BATTERY CHARGING
1) Make sure you have the battery inserted in your phone.
2) You can charge your phone when it is switched on or off.
3) The charging port is located at the bottom of the phone.
4)
The phone can be charged directly using the included 230V
charger with USB
C c
onnector or by placing the phone in
the stand and connecting it to the charger. After charging
t
he battery, disconnect the charger from the mains.
SWITCHING ON AND OFF
To switch on the phone, hold down the red handset button
(9)
until the phone switches on.
E
nter the SIM card PIN, if required.

Related product manuals