> Click the Export locking chart button.
> Select the Export button in the "Export locking chart" dialogue window.
> Click the link of the CSV file that appears in the next dialogue window.
> Open the CSV file with the desired program or save the file.
> Click the Close button to close the "Export locking chart" dialogue window.
Figure 161: Locking chart
The AirKey Online Administration status is used to calculate the authori-
sation status, not the ACTUAL status on the medium. Consequently, the
locking chart is only correct if all components and media are up to date.
Locking chart legend:
> 0 – Not authorised: medium not authorised for the locking component or any area
assigned to the locking component.
> 1 – Permanent authorisation without expiry date: medium features exactly one
permanent authorisation without expiry date for the locking component or one area
to which the locking component has been assigned to and no other authorisations for
the locking component or an area assigned to the locking component.
> 2 – Permanent authorisation with expiry date: (1) does not apply as the medium
features exactly one permanent authorisation for the locking component with expiry
date in the future or one area to which the locking component has been assigned to
and no other authorisations for the locking component or an area assigned to the
locking component.
> 3 – Periodic authorisation without expiry date: (1) and (2) do not apply as the
medium features exactly one periodically valid authorisation without expiry date for
the locking component or one area to which the locking component has been
assigned to and no other authorisations for the locking component or an area
assigned to the locking component.
> 4 – Periodic authorisation with expiry date: (1), (2) and (3) do not apply as the
medium features exactly one periodically valid authorisation for the locking
component with expiry date in the future or one area to which the locking component
has been assigned to and no other authorisations for the locking component or an
area assigned to the locking component.
> 5 – Single authorisation: (1), (2), (3) and (4) do not apply as the medium features
exactly one single authorisation for the locking component with expiry date in the
future or one area to which the locking component has been assigned to and no other
authorisations for the locking component or an area assigned to the locking compo-
nent.
To Next Page
Loading...