AirKey system manual version 2.7 |
06/03/2024 | Subject to technical changes and misprints
Figure 259: Updating data
Data is updated. During transfers do not remove the NFC smartphone from the component
for synchronisation or remain within the locking component range with the Bluetooth
smartphone. A corresponding message will appear once the process has been completed.
The information shown in the update message varies depending on whether
maintenance authorisation has been activated or not on the smartphone
and whether the locking component is in your own or an external access
control system.
Figure 260: Update messages
Deactivate the Hands-free mode before connecting to a Bluetooth locking
component. Otherwise, the connection may be interrupted.
Bluetooth locking components can also be updated automatically after each
Bluetooth unlocking. For more information on the "Update after each
unlocking" function, see Default values (for all recently added locking
components).
Updating locking components using coding stations
Proceed as follows to update locking components using coding stations:
To Next Page
Loading...