AirKey system manual version 2.7 |
06/03/2024 | Subject to technical changes and misprints
smartphone replacement where authorisations are transferred.
To scan the QR code with a target media that is not yet registered, follow the steps below:
> Start the AirKey app.
> Confirm the licensing conditions.
> Tap on Scan QR code and scan the QR code from the source medium.
To scan the QR code with a target media that is already registered, follow the steps below:
> Start the AirKey app.
> Tap Settings → Add access control system.
> Tap on Scan QR code and scan the QR code from the source medium.
The smartphone replacement is now complete and the target medium is successfully regis-
tered with the permissions and settings of the source medium. The source medium will be
deactivated automatically after the successful replacement.
If the source medium is registered in more than one access control system,
the replacement is started in all access control systems at the same time.
This means that several administrators may have to confirm the
replacement within the AirKey Online Administration. Only those AirKey
authorisations and settings will be transferred to the target medium in
which the administrators have confirmed the replacement.
10.1.2 Starting replacement as administrator
If the source medium is no longer available or no longer functional, the replacement can also
be started as an administrator.
> Click on the tile Smartphone on the Home screen.
> Alternatively select Media & Persons → Media.
> Select the smartphone you want to replace.
> Click on More... → Replace smartphone .
To Next Page
Loading...