AirKey system manual version 2.7 |
06/03/2024 | Subject to technical changes and misprints
> The system creates a maintenance task.
> Update the locking component using a smartphone with maintenance authorisation or
an optionally available coding station.
> This deletes the maintenance task from the list and the share is up to date.
> As soon as you have added the shared locking component, the locking component is
listed in the "Access control system" column of the locking component list with the
"external" attribute. Each client who has added the locking component can edit the
alternative door designation in the "Details" tab and assign the locking component to
an area. Open the "Settings" tab and change the radio button in the "Data protection"
section to either make personal data in event log entries available to locking
component owners or render the data anonymous. You can also configure personal
data in event log entries in the "Logging and repair options" section for the enabled
access control system. You can also assign access authorisations for shared locking
components.
External locking components cannot be shared with other access control
systems.
11.3 Assigning authorisations for shared locking components
Within each access control system to which the authorised locking component was added,
the process to assign authorisations differs marginally to that for owners of the locking
components. Proceed as follows if you have added a shared locking component to your
access control system.
> On the Home screen, select the Smartphones or Cards tile.
> Alternatively select Media & persons → Media in the main menu.
> Select the desired medium from the overview list.
> If the medium has been assigned to a person, an overview of authorisations for this
medium appears.
> Select the External tile below the tiles for all locking components and areas to
display a list of all locking components added from external access control systems.
To Next Page
Loading...