authorisation additionally allows updates of the locking component firmware and of
the media Keyring.
> This medium can activate the manual office mode: select this option and the
access medium can set the automatic office mode status at the locking component.
However, the medium must have been assigned a valid authorisation for the
corresponding locking components.
> Show the medium event log of the smartphone in AirKey app: This option shows
persons their own access events and any other event log data relevant to the media
in the AirKey app.
> Release duration: Specifies how long the locking component is unlocked when using
this smartphone. The length of the normal or enhanced release duration is specified
in the locking components (from 1-250 seconds).
> PIN code of the AirKey app: Shows the status of whether PIN code protection is on
or off in the AirKey app of this smartphone. If it is active and the person has
forgotten their PIN code, you can reset it here.
> Update after each access: Specifies the status whether the AirKey app data of this
smartphone is automatically updated after each access process. Details about the
activation of this function can be found in the chapter General.
4.9 Registering smartphones
You can register smartphones once you have created them in the access control system and
you know the registration code.
> Start the AirKey app on your smartphone.
> Accept the license agreement and any queries about access to certain services of the
smartphone.
> If the smartphone has not been connected to an access control system, the dialogue
for entering the registration code is displayed automatically.
To Next Page
Loading...