AirKey system manual version 2.7 |
06/03/2024 | Subject to technical changes and misprints
The Scan QR code button is only required in conjunction with a smartphone
replacement. Details about the smartphone replacement can be found in
the chapter Smartphone replacement.
If users delete the AirKey app or app data, there is the option to once again assign
authorisations that had already been granted to the smartphone without using additional
credits. However, this exclusively applies to the same device and your access control
system. This option does not apply to a different device. Details about the simple device
replacement can be found in the chapter Smartphone replacement.
> On the Home screen select the Smartphones tile.
> You can also select Media & persons → Media in (the upper left corner of) the
header.
> Select the affected smartphone from the overview list.
> Click Create new registration code and send the registration code to the person
wanting to register a smartphone to the access control system.
> Enter the registration code in the AirKey app and the smartphone is registered to the
access control system.
If your smartphone had previously been registered to an access control
system and it had not been correctly removed from this system when the
app data was deleted and you then register your smartphone to a different
access control system, a message appears indicating the smartphone had
already been registered to an access control system. You can register the
smartphone as usual if you ignore the message. The smartphone is created
as a new medium and any previous data is rendered unusable.
EVVA recommends assigning a PIN code. It serves as an additional level of
security. You can subsequently activate or deactivate the PIN code protec-
tion. Please refer to Activating PIN code for more information.
4.9.1 "Send a Key" function
To all persons owning a smartphone you can also send "keys" using the "Send a Key"
function. This function is useful to administrators and saves smartphone owners from
manually entering the registration code for a new access control system.
> Click the "Send a Key" button.
To Next Page
Loading...