EVVO INTENSA 10 - Product Features; Detachable Water Tank and Drip Tray; Espresso and Milk Frothing Capabilities; Front Panel with Pressure Meter

CAFETERA ESPRESSO EVVO INTENSA 10/10S
20
ENGLISH
1. Product features
1. Detachable transparent water tank and drip tray
2. Make all kinds of espresso coffee
3. Durable stainless cup plate for coffee cups preheating
4. Make espresso coffee and milk foam
5. Detachable frothing nozzle and drip tray for easy cleaning
6. The front panel with a pressure meter to show the pressure value (only for Intensa
10S Model)
2. Know your coffee machine
(Fig.1)
1. Water tank cover
2. Water tank
3. Steam control knob
4. Control panel
5. Pressure gauge (only for Intensa 10S Model)
6. Metal coaster
7. Steam wand
8. Drip tray
9. One-cup mesh
10. Two-cup mesh
11. Portalter
12. Aluminum alloy portalter (handle in black plastic)
13. Measuring spoon and tamper
14. Milk frothing button
15. Making espresso button
16. ON/OFF button
3. First use/cold machine state preparation
1. Fill water into the water tank NOT exceed the MAX line. Set up the water tank
vertically and align the buckles to the hole on the back of the machine, and press it
down to be parallel to the top of the machine. (If you had operated the machine just
now, skip this step)
2. Remove the portalter from the packaging box, put mesh inside the portalter
make sure the tube on the mesh aligns with a groove in the portalter. and screw it
into the corresponding position of the appliance. The portalter handle is aligned