EVVO INTENSA 10 - Hot Water Function; Cooling Function; Cleaning and Maintenance

CAFETERA ESPRESSO EVVO INTENSA 10/10S
22
ENGLISH
1CM into the milk surface, then slowly unscrew the “steam control knob” until the
steam starts to come out. (Fig.4)
(Note: Steam can be adjusted according to personal prociency. Release a little water
in the steam pipe before foaming)
3. When the temperature of milk reaches about 75 degrees and the milk foam begins
to inate, you can twist the “steam control knob” to “OFF” and press “ ” milk
frothing button to close.
6. Hot water function
Press the “ ” (making espresso button) when the “ ” ON/OFF button is
illuminated, then turn the “steam control knob” to “ON”, and the steam pipe
starts to continuously discharge hot water; Turn the “steam control knob “ to” OFF
“stop the hot water.
Note: THE FIRST TIME USE OR A LONG TIME NOT USE THE MACHINE
For a better taste and good for your health, we suggest you rinse the machine and
release the water out before you use other function.
7. Cooling function
When the machine makes coffee after the steam, turn off the “ milk frothing button
“, because the temperature is too high, coffee of indicator light will ash, the machine
needs to be cooled. At this time, rotate the “steam control knob” to ”ON”, the
machine starts to pump water, and the steam pipe starts to continuously discharge
water and cool down. After the indicator light ashes quickly, turn the “steam control
knob” to “OFF” and stop cooling down. It can make coffee when the power indicator
is on.
8. Cleaning and maintenance
1. Cut off the power and let the coffee machine clean before it cools completely.
2. Wipe the outside and parts of the coffee maker with a damp cloth or a clean sponge.
Note: Do not use alcohol or solvent cleaner, do not immerse the machine in water to