Need help?Do you have a question about the ExBrite 13MC2432V4LX and is the answer not in the manual?
Read and follow all safety instructions carefully before installation and maintenance for safe operation.
Ensure compliance with wiring regulations and switch off power before installation or maintenance.
Inspect for damage, handle with care, protect glass edges, and check for hidden pipes/cables before drilling.
Do not disassemble the product as LED light sources can cause eye damage.
Ensure proper space is maintained around the cabinet during installation.
Mark hole locations, drill, and insert wall anchors for secure mounting.
Fasten the mounting bar to the wall using the provided round-head screws.
Align and press side panels until they clamp securely to the cabinet.
Lift the cabinet onto the mounting bar and connect the wiring properly.
Attach the support angle to the bottom of the cabinet and secure it to the wall.
Install glass shelves and adjust door hinges for proper alignment and smooth operation.
Attach the decorative hinge covers after door adjustments are complete.
Measure and confirm the required opening dimensions for embedding the cabinet.
Connect the electrical wires using the 3-connection cap as indicated.
Place the cabinet into the opening and secure it using the provided screws.
Adjust the door hinges to ensure proper alignment and smooth door operation.
Identify key components like bright sensor, USB socket, and control buttons.
Understand the automatic night light operation based on ambient brightness and manual control.
Learn how to use touch buttons for power, color temperature, dimming, and defogging.
Understand the time adjustment mode and the alternating time/temperature display.
General| Brand | ExBrite |
|---|---|
| Model | 13MC2432V4LX |
| Category | Indoor Furnishing |
| Language | English |
To Next Page
