Need help?Do you have a question about the ExBrite LSJSBM6028BLAL Series and is the answer not in the manual?
Adhere to wiring regulations and ensure electrical safety during installation and maintenance.
Inspect for damage, protect glass, check walls for pipes, and wear eye protection when drilling.
Do not disassemble the product as the non-changeable LED light can cause eye damage.
Verify all listed items including LED mirror, mounting bar, screws, and anchors are present.
Gather necessary tools such as a level, drill, screwdriver, measuring tape, and pliers.
Level and mark the wall, then securely attach the mounting bar using anchors and screws.
Connect the mirror to the main supply, either via plug or direct wiring after cutting power.
Carefully hang the mirror onto the installed mounting bar, ensuring it's secure.
Button controls power and color temperature adjustment between warm and cool white.
Short-touch for power, long-touch for brightness adjustment.
Activates/deactivates defogger; auto-stops after 60 minutes.
Instructions for setting hour and minute using buttons.
Shows clock/temp, auto night light based on brightness.
Clean with a soft dry cloth only. Avoid cleaning agents and moisture.
General| Brand | ExBrite |
|---|---|
| Model | LSJSBM6028BLAL Series |
| Category | Indoor Furnishing |
| Language | English |
To Next Page
