Anti-Carjacking Protection
The system is equipped with two separate Anti-Carjacking protection features (ignition,
open door, or both). All are programmable, and must be turned on to operate. Once
activated, the user has 60 seconds to cancel the Anti-Carjacking protection process
(described below). If Anti-Carjacking is not cancelled, 53 seconds after being activated
the siren will begin to chirp for 7 seconds to alert the user that the system is about to enter
into an alarm condition. The Valet Switch may still be pressed once during this period to
cancel the Anti-Carjacking process.
If the Anti-Carjacking process is not cancelled before the 60 second countdown ex-
pires, the system will enter an alarm condition, sounding the siren and ashing the parking
lights. 30 seconds after this occurs, or should the ignition be turned off in the meantime,
the stater interrupt will engage. Once the system enters the alarm condition, it will not
respond to the transmitter, nor will the system reset automatically after 60 seconds, and it
can only be disengaged by:
Step 1 Turning the vehicle’s ignition off.
Step 2 Turning the ignition back on.
Step 3 Within 5 seconds, perform an Emergency Override using the Valet Switch. If the
SecureCode has been customized, the correct number of Valet Switch presses must be
made.
The different types of Anti-Carjacking protection are:
Ignition Activated Anti-Carjacking activates every time the vehicle’s ignition is turned
on. The Valet Switch must be pressed within 60 seconds of activating to cancel Anti-
Carjacking. This is User Programmable Feature #12.
Door Anti-Carjacking activates when a door is opened after the vehicle is started and
the engine is running. The Valet Switch must be pressed within 60 seconds after activa-
tion to cancel Anti-Carjacking. This is User Programmable Feature #12.
18
To Next Page
Loading...
Need help?
General
