Need help?Do you have a question about the Excalibur RS-X60-EDP and is the answer not in the manual?
General| Brand | Excalibur |
|---|---|
| Model | RS-X60-EDP |
| Category | Remote Starter |
| Language | English |
Details regarding the connections and requirements for the 6-pin main wire harness.
Specific instructions for connecting the constant 12v power input wires.
Guidance on connecting the primary ignition input/output wire for system operation.
Instructions for connecting the accessory output wire for climate control and other features.
Details on connecting the positive output wire for the vehicle's starter circuit.
Information on connecting the programmable ignition #2 output wire.
Instructions for connecting the system ground wire to the vehicle chassis.
Details on the status/anti-grind output, available on EDP+ models.
Guidance on connecting the brake pedal input for critical safety disengagement.
Instructions for connecting the neutral safety input for safe remote start operation.
Details on connecting the tachometer signal input for engine RPM detection.
Information on connecting the horn output wire for audible feedback.
Guidance for connecting the positive output for flashing parking lights.
Details on connecting the negative output for flashing parking lights.
Instructions for connecting the hood trigger input for safety during remote start.
Details on connecting the gray wire for manual transmission door pin input.
Instructions for the yellow wire output controlling aftermarket alarm ignition input.
Guidance on connecting the white/blue wire for activating the remote start function.
Details on the green/red wire output for OEM alarm arming.
Information on the green/black wire output for OEM alarm disarming.
Instructions for connecting the red/white wire for trunk release or CH2 functions.
Details on mounting and connecting the window-mount antenna module.
Information about the 3-pin port for door lock and unlock functions.
Details on the 3-pin satellite relay port for programmable outputs.
Summary of wires in the 6-pin power harness and their functions.
Instructions for the green wire's programmable negative start output.
Details on the red wire's constant positive output for relay coils.
Information on the blue wire's programmable negative ignition output.
Instructions for the green wire's negative pulse output for locking.
Description of the center pin's constant positive output for interfaces.
Details on the blue wire's negative pulse output for unlocking.
Details on mounting and connecting the window-mount antenna module.
Configuration for the duration of the remote start sequence.
Setting options for visual confirmations via flashing lights.
Adjusting the volume level for audible system confirmations.
Configuration options for the brown wire's siren or horn output.
Setting ignition lock and unlock behavior for remote start.
Options for bypassing door status detection during operation.
Enabling unlock function in conjunction with trunk release.
Defining remote start activation methods via transmitter buttons.
Configuration for arming the system after the last door is closed.
Settings for automatic re-arming of the security system.
Customizing audible confirmation chirps for system events.
Configuring the anti-carjacking feature for security.
Programming the remote start activation input pulse count.
Configuring the function of the pink/white wire.
Selecting the method for engine detection (Tachless, Tach Wire).
Specifying engine type for optimal remote start operation.
Programming the green wire output on the satellite relay port.
Programming the blue wire output on the satellite relay port.
Setting the duration for engine cranking during remote start.
Configuring the pulse duration for door lock/unlock outputs.
Defining lock behavior relative to remote start activation.
Setting the duration for the turbo timer function.
Enabling and configuring settings for manual transmission vehicles.
Selecting the communication protocol for data ports.
Enabling or disabling the virtual alarm feature.
Configuring ignition pulse behavior upon disarming the system.
Setting the system to lock upon pre-warning activation.
Configuring starter interrupt for EDP+ models.
Extending crank time for low-temperature starts on EDP+ models.
To Next Page
