119649 1-1 REV A
GENERAL INFORMATION
To the New Owner
The purpose of this manual is to assist owners and operators
in maintaining and operating the Excel Two Bag Catcher. Please
read it carefully; information and instructions furnished can help
you achieve years of dependable performance.
Using This Manual
General operation, adjustment and maintenance guidance is
outlined for both the experienced and novice Excel user.
Operating conditions vary considerably and cannot all be
addressed individually. Through experience, however, operators
should find no difficulty in developing good operating skills
suitable to most conditions.
Directions used in this manual, for example RIGHT or LEFT,
refer to directions when in operator position and facing forward,
unless otherwise stated.
Photographs and illustrations used were current at the time of
printing, but subsequent production changes may cause your
machine to vary slightly in detail. Excel reserves the right to
redesign and change the machine as deemed necessary, without
notification. If a change has been made to your machine which
is not reflected in this operator’s manual, or the parts manual,
see your Excel Dealer for current information and parts.
Warranty Registration
Your Excel Dealer must register the unit on-line within ten
(10) days following date of purchase to validate your warranty
protection. As the new equipment owner, you should confirm
that your Excel Dealer has registered your catcher with Excel
Industries, Inc.
IMPORTANT: Any unauthorized modification, alteration,
or use of non-approved attachments voids the warranty and
releases Excel Industries, Inc. from any liability arising from
subsequent use of this equipment. Do not use or operate any
attachment not approved by Excel Industries, Inc.
Parts and Service
Use original Excel replacement parts only. These parts are
available through your local Excel Dealer. To obtain prompt,
efficient service, always provide the following information
when ordering parts:
1. Correct part description.
2. Correct part number.
3. Correct model number.
4. Correct serial number.
All warranty repair and service must be handled through an
authorized Excel Dealer. Arrangements should be made through
your local service center.
To Next Page
Loading...