!
Installation of the carbon filter
This machine is equipped with the active carbon filter. The activated carbon is charcoal
that has been treated with oxygen to open up millions of tiny pores between the carbon
atoms. It is used to get rid of unwanted odors (smoke, fumes, and animal odor). Please
note, the carbon filter is not washable, its life span is variable and depends on the
ambient conditions where the unit is used. The filter should be checked periodically
and replaced if necessary (normally, it’s 6 months), below is the installation of the active
carbon filter along with this unit:
1.
Separate the filter frame the unit.
2.
Take out the carbon filter from its
bag.
3.
Apply the carbon filter on the unit.
4.
Fix back the filter frame on the unit.
To Next Page
