Exibel BIT100 User Manual

6
English
7
8
9
11
12
10
Charging
Charging the charging case
1. Connect theincluded USB charger lead to theMicro-USB
charging port (5) on thecharging case and to acomputer or
other USB charger.
2. When charging is in progress thered LED indicator (12) will be lit.
3. When thebattery is fully charged, thered indicator will go out
and theblue LED indicator (11) will shine.
Information
• Thebattery built into thecharging case has thecapacity to
fully charge theearphones 2 times.
• If theearphones are in thecharging case with thelid closed
while it is being charged, they too will be charged.
Charging the earphones
1. Open thelid of thecase by pressing thebutton (8).
2. Insert theearphones into thecharging case making sure that their
contacts (9) engage with thecontact pins in thecharging case.
3. Carefully close thelid. When theearphones are pushed down
onto thecontacts they will begin charging.
4. TheLED indicators (10) on theearphones, which amongst
other things indicate thecharge status, can be seen through
thewindows (7) in thelid of thecharging case.
5. TheLEDs on theearphones shine red while charging is in
progress and go out when theearphones are fully charged.

Exibel BIT100 Specifications

General

Brand	Exibel
Model	BIT100
Category	Headphone
Language	English