Exploranium KT-9 - Page 57

Options
49
Display symbols
The characters that the KT-9 displays are summarized as follows:
Character(s) Meaning Description
A:
Access:
Indicates the mode of mea-
surement can be set
C:
Control:
Indicates that you can change
from right-handed to left-
handed operation
Cor:
Core:
Indicates that the measure-
ment mode is set for
CORE
sam-
ples
Cdd:
Core
Diameter:
C
ORE
sample measurement set
for a diameter of “
dd
” cm
d:
Diameter:
The core diameter in cm
EC:
External Coil
An external coil is connected
and will be used
ErrX
Error:
Error number “
X
” occurred.
See “Error messages” on
page 50.
F:
Full:
The data memory is full, i.e. ten
readings have been stored
o:
Average:
The displayed value is the aver-
age of all the data in memory
P:
Pin:
The measurement mode is set
for the
PIN
mode
nP:
No-Pin:
The measurement mode is set
for operation without the pin
in place
Options
49
Display symbols
The characters that the KT-9 displays are summarized as follows:
Character(s) Meaning Description
A:
Access:
Indicates the mode of mea-
surement can be set
C:
Control:
Indicates that you can change
from right-handed to left-
handed operation
Cor:
Core:
Indicates that the measure-
ment mode is set for
CORE
sam-
ples
Cdd:
Core
Diameter:
C
ORE
sample measurement set
for a diameter of “
dd
” cm
d:
Diameter:
The core diameter in cm
EC:
External Coil
An external coil is connected
and will be used
ErrX
Error:
Error number “
X
” occurred.
See “Error messages” on
page 50.
F:
Full:
The data memory is full, i.e. ten
readings have been stored
o:
Average:
The displayed value is the aver-
age of all the data in memory
P:
Pin:
The measurement mode is set
for the
PIN
mode
nP:
No-Pin:
The measurement mode is set
for operation without the pin
in place