Explore Scientific RDP1001 - Getting Started; Ac;DC Power Adapter

7
EN
IT
DE
FR
ES
NL
GETTING STARTED
INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 2x AAA (LR03)/1.5V batteries. Please ensure
the polarities (+/-) of the batteries match upon
installation.
3. Reattach the battery door.
NOTE: Replace batteries when [ ] displays, or when
the display is dim.
AC/DC POWER ADAPTER
4
Only use a compatible AC/DC Power adapter (3.6V
4
100mA). Plug the power cable to the power jack
and the power adapter to a suitable power outlet.
NOTE: We recommend to insert batteries as backup
power source.
CLOCK
CLOCK RECEPTION
1. Replace batteries or press [ ] button will initiate
RCC receiving.
2. RCC receiving can work in both date mode and alarm
mode.
3. The receiving process duration is 7 minutes.
4. During receiving process, the RCC signal symbol
[ ] ashes.
5. If the RCC receiving process is successful, a completed
RCC symbol [ ] will be shown in the display and
the date and time will be set automatically. If it fails
within 7 minutes, RCC setting will quit automatically.
If that happens, press [ ] button to re-initiate
RCC receiving.
6. RCC receiving will automatically start at 2:03, 3:03,
4:03, 5:03 every night. Auto receiving function will
cease if it is successful.
7. To stop RCC reception, press the [ ] button.
8. If the device is still not receiving the signal, please
proceed to set the time manually.