EasyManua.ls Logo

Explore Scientific RDP1001 - Turn On;Off Alarm; Operation

Explore Scientific RDP1001
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
EN
IT
DE
FR
ES
NL
3. Press the [ ] or [ ] button to switch
Celsius (°C) / Fahrenheit (°F).
ALARM
SETTING/ADJUSTING DUAL ALARM TIME
You can set one alarm time for weekdays, (Monday
to Friday / 1-5) and one alarm time for the weekend
(Saturday to Sunday / 6-7).
Alarm 1 = Weekday alarm (1-5)
Alarm 2 = Weekend alarm (6-7)
1. Press and hold [ ] button, enter alarm setting.
2. Sequence of setting: Alarm 1 (1-5) weekday hour
weekday minute Alarm 2 (6-7) weekend hour
weekend minute exit
3. During setting, the setting parameter will flash.
4. Press [ ] button once to increase by 1 or press
[ ] once to decrease by 1. Alternatively press
and hold the [ ] button to change the figures
rapidly.
5. Press [ ] button to confirm setting and enter to next
parameter.
6. Press [ ] button to turn on/off alarm.
7. The alarm will sound when the alarm setting is
finished and turned on.
8. If there is no action in 20 seconds, the setting will be
saved and will exit the setting mode.
TURN ON/OFF ALARM
1. Press the [ ] button once to turn on/off the
alarm that is nearest in time. (1-5) or (6-7) will ash
to indicate which alarm was activated.
How to activate alarm times individually:
2. Press [ ] button once to switch to alarm mode.
Monday to Friday alarm time will be shown and (1-5)
will ash.
3. Press [ ] button once to turn on/off Monday
to Friday alarm.
4. Press [ ] button again to show Saturday to Sunday
alarm time. (6-7) will ash.
5. Press [ ] once to turn on/off Saturday to
Sunday alarm.
OPERATION
1. At the set time, alarm signal rings.

Table of Contents

Related product manuals