EasyManua.ls Logo

Explore Scientific RDP1002 - Specifications and Declarations; Device Specifications; Temperature Display Notes; EC and RCM Declarations of Conformity

Explore Scientific RDP1002
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
EN
IT
DE
FR
ES
129 x 26 x 70 mm (L x W x H)
Weight (Main unit):
125 g (Exclude batteries)
Temperature display range:
-5 °C to +50 °C (23 °F to 122 °F)
Power:
2x AAA (LR03) 1.5V batteries
Power adapter 5V
NOTE
• When the temperature is lower than -5°C(23°F), the
temperature displays LL.L. When the temperature is
higher than 50°C(122°F), the temperature displays HH.H.
• During alarm rings or RCC receiving process,
temperature detection will be stopped.
EC DECLARATION OF CONFORMITY
Hereby, Folux GmbH declares that the
equipment type with part number: RDP1002
is in compliance with Directive: 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address: www.bresser.
de/download/RDP1002/CE/RDP1002_CE.pdf
RCM DECLARATION OF CONFORMITY
The adapter complies with electrical safety,
EMC and radio spectrum regulatory
requirements for products supplied to the Australia
or New Zealand market.
NOTES ON CLEANING
Remove the batteries before cleaning.
• Only use a dry cloth to clean the exterior of the
device. To avoid damaging the electronics, do not
use any cleaning fluid.
• Protect the device from dust and moisture.

Related product manuals