Page 1
1 General Safety Rules
Be sure that this machine should only operated by qualified personnel. Be sure that
all installation, operation, maintenance and repair procedures are performed only by
authorized personnel. Be sure to read user guide carefully before operating the
machine. Failure to follow the instructions included in the user guide may cause
serious injury, loss of life and damage on machine. Please read the warnings next to
the symbols stated below. "Kaynak Tekniği Sanayi ve Ticaret A.Ş." is not liable for
any damages due to improper connection, storage conditions and operation
procedures.
THIS MACHINE HAS BEEN DESIGNED FOR GMAW (MIG/MAG).
SHALL NOT BE USED FOR ANY OTHER PURPOSE.
WARNING: This symbol indicates that the instructions within the user guide must be
followed to avoid potential serious personal injury, loss of life and damages on machine.
Protect yourself and other people.
READ AND UNDERSTAND THE INSTRUCTIONS CAREFULLY:
Be sure to read and understand the user guide before operating the
machine. Failure to follow the instructions stated in the user guide may
cause serious injury, loss of life and damage on equipment.
Do not weld while you are unattentive, unattentive, tired and sleepless.
Arc welding is a safe application when necessary measures are taken to protect the
welder against potential dangers. If these measures missed or disregarded, there may
be dangers such as electric shock, exposing to high levels of fume and gas, arc
radiation, fire and explode which may cause serious injury or even death.
Not :e For detailed information on safety in welding, please read ANSI Z49.1 standard.
Protective Equipments:
Welding operators should wear protective clothing to protect themselves against
burning risk. Welding burns is a frequent risk which may be caused due to splash of
welding sparks on bare skin.
Clothing used while welding may vary based on used welding method but generally it
should provide easy movements and should cover welder s body to protect against'
splashes, sparks and arc radiation.
Expressweld MasterMIG 500W
To Next Page
Loading...