20
English EX-1309-T
LINUX
There are drivers available for Linux. The drivers are located in the folder
“D:\USB_to_IO\FTDI\Linux x86_64“ on the driver CD. They are supported by the most
versions of Linux. Because each individual distribution and kernel version of Linux is
different, sadly we cant provide a installation instruction. Please refer to the installation
manual for standard I/O ports from your Linux version!
MAC
There are drivers available for MAC. The drivers are located in the folder
“D:\USB_to_IO\FTDI\MAC OSX or Mac_OS_9_8“ on the driver CD. They are support-
ed by the most versions of MAC OS. Because each individual version of MAC OS is
different, sadly we cant provide a installation instruction. Please refer to the installation
manual for standard I/O ports from your MAC OS version!
6. Driver Installation
7. Technical Information
Operating Temperature: 0 to 55°C (32 to 131°F)
Storage Temperature: -40 to 75°C (-40 to 167°F)
Operating Humidity: 5 to 95% RH
Baud Rate: 110bps to 921.6Kbps
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd
RS-232 Signal: TXD, RXD, DTR, DCD, GND
RS-485 2-wire Signal: DATA+(B), DATA-(A), GND
RS-485 4-wire and RS-422 Signal: TXD+, TXD-, RXD+, RXD-, GND
To Next Page
Loading...