Extang Trifecta 2.0 - Finish Detaching Cover from Rails; Loosen Frame Fasteners; Slide Side Rails Out

Place the tonneau on a clean, at surface and nish detaching the cover from the side rails and corners.
Repeat the procedure for the other side.
Remove one side of the frame. To do this you will need the 3/16” Hex wrench. Loosen but do not remove
the fastener from the tail rail.
The side rail should now slide out of the corners and bows. Repeat the procedure on the other side.
4
5
6
Tarp Removal
CAB RAIL
TAIL RAIL