Need help?Do you have a question about the Extech Instruments 480823 and is the answer not in the manual?
General| Model | 480823 |
|---|---|
| Measures (Anemometer) | Air Velocity, Air Flow, Temperature |
| Data Hold | Yes |
| Min/Max | Yes |
| Category | Anemometers |
| Measurement Range (Moisture) | 10 to 95%RH |
| Air Flow Range | 0 to 999, 900 CFM or CMM |
| Resolution | 0.1%RH |
| Weighting Networks | A, C |
| Time Weighting | Fast, Slow |
| Display | LCD |
| Battery Type | 9V |
| Power Source | Battery |
| Type | Anemometer, Hygrometer, Sound Level Meter |
| Air Velocity Range | 0.4 to 30.0 m/s; 1.4 to 108.0 km/h; 0.9 to 67.0 mph; 0.8 to 58.3 knots; 80 to 5910 ft/min |
Features a 0.5" (13mm) 3-1/2 digit LCD with low battery and overload indicators.
Takes readings approximately every 0.4 seconds.
Measures up to 20µTesla (0.01) or 200mGauss (0.1).
Accuracy is rated at ± (4% + 3 digits) at 50/60Hz.
Operates within a 30 to 300Hz frequency bandwidth for single-axis measurements.
Displays "1" on the left side of the LCD to indicate an overload condition.
Functions between 32-122°F (0-50°C), with RH limits of 90% (0-35°C) and 80% (35-50°C).
Powered by a standard 9V battery.
Consumes approximately 3mA DC during operation.
Compact size of 5.2 x 2.8 x 1" (131 x 70 x 25mm).
Lightweight design at 0.36 lbs. (165g).
The primary digital readout screen for measurements and status.
The component that detects and measures electromagnetic fields.
Controls the device's power and allows selection between Gauss and Tesla units.
Set the switch to 'Gauss' or 'Tesla' mode before measurement.
Slowly move the sensor towards the test device and observe the LCD reading.
Vary meter angles to observe how positioning affects EMF readings.
Note the highest reading obtained from various measurement positions.
A '1' on the left of the LCD indicates radiation exceeds meter capability.
Call 781-890-7440 for service, technical support, or repair information.
Visit www.extech.com for the latest guides, software, and product info.
To Next Page
