Need help?Do you have a question about the Extech Instruments PRT200 and is the answer not in the manual?
Power| input voltage | 75 to 1000VAC |
|---|---|
| batteries | 4 x 1.5V AA |
| current consumption | 15mA |
Operating Environment| operating temperature & humidity | -10°C to 50°C (14°F to 122°F) Max. 80% R.H. |
|---|---|
| storage temperature & humidity | -20°C to 60° (-4°F to 140°F) Max. 80% R.H. |
| frequency range | 45 to 65Hz |
Weight and Dimensions| max conductor diameter | 33 mm (1.3”) |
|---|---|
| probe length | 86 cm (34”) |
Explains symbols indicating manual reference and hazardous voltages.
Lists essential precautions for safe operation and handling of the tester.
Details the functions of the meter's controls, LEDs, and buzzer for operation.
Describes the magnets, battery compartment cover, and screw on the rear of the tester.
Instructions for powering on, connecting clips, and interpreting phase sequence indications.
Details status indicators, brightness control, auto power off, and magnetic mounting for efficient use.
Procedures for replacing batteries and legally disposing of used batteries according to regulations.
Guidelines for cleaning the tester with a damp cloth and proper storage procedures.
Lists technical specifications including voltage, frequency, dimensions, and safety ratings.
To Next Page