Need help?Do you have a question about the Extech Instruments PRC10 and is the answer not in the manual?
General| Brand | Extech Instruments |
|---|---|
| Model | PRC10 |
| Category | Test Equipment |
| Language | English |
Explains symbols indicating manual reference or hazardous voltages.
Lists essential safety guidelines, notes, and critical warnings for device usage.
Details the physical components and input/output jacks of the Current Calibrator.
Describes the icons, modes, values, and units shown on the meter's LCD display.
Explains how to use the power button and the automatic power-off function.
Details the operation of UNIT, I/O, MODE, Backlight, ZERO, and arrow buttons.
Explains how to use the SET button to step through memory locations for output.
Describes using the STEP/MEM button for cycling through stored output values.
Guides users on how to change and save output values in the meter's memory.
Details how to measure current up to 50mADC using the meter.
Explains how to source current up to 24mADC manually or from memory.
Describes the functionality of the meter's built-in tilt stand for viewing and hanging.
Provides instructions on replacing batteries and lists important safety precautions.
Outlines general technical details like display, load, power, and environmental limits.
Details the measurement and sourcing ranges, resolutions, and accuracies.
To Next Page