VB300 V1.1 11/10
5
Datalogging Software Program
INSTALLING THE DATALOGGER SOFTWARE
Install the supplied Windows
TM
PC Datalogger Software by placing the supplied program disk in the PC’s CD-ROM
drive. If the installation program does not automatically open and provide on-screen prompts (as shown in diagram
below), open and browse the CD-ROM drive, then find and double-click on the SETUP.EXE file included on the
program disk. Follow the on-screen prompts as shown below to complete the installation.
Before running the datalogger software, please connect the VB300 to the PC and install the USB Driver software as
described in the next section.
To Next Page
Loading...
Need help?
General
