Need help?Do you have a question about the Extech Instruments SD700 and is the answer not in the manual?
General| Resolution (CO2) | 1 ppm |
|---|---|
| Display | LCD |
| Data Logging | Yes |
| Temperature Range | 32 to 122°F (0 to 50°C) |
| Humidity Range | 10 to 90%RH |
| Resolution (Humidity) | 0.1%RH |
| Interface | USB |
| Measurement Range (CO2) | 0 to 5000 ppm |
| Data Logging Capacity | 16, 000 readings |
| Power Supply | 6 AAA batteries or AC adapter |
| Sampling Rate | 1 to 3600 seconds |
| Memory | Internal memory |
| Resolution (Temperature) | 0.1°F (0.1°C) |
| Accuracy (Temperature) | ±1.8°F (±1.0°C) |
| Measurement Parameters | CO2 |
Lists key features of the datalogger including LCD display, SD card storage, and selectable sampling rates.
Provides instructions on battery replacement, low battery indicator, and proper installation.
Explains how to insert SD card, start/stop data logging, and error messages.
Describes how to check and cycle through date, time, and sample rate settings.
Guides on removing the SD card, inserting it into a PC, and opening data files in Excel.
Details how to perform a system reset using the reset button to recover from frozen states.
Explains the availability of RS232 serial output for PC connectivity and where to get more information.
Offers important safety guidelines regarding battery disposal and mixing battery types.
To Next Page