USER PARAMETERS
36
Chapter 10
LACK OF FUEL
Increase the percentage value by 5 points and try the
stove with the new calibration for at least half an hour.
If the problem is attenuated, but not solved, increase by
another 5 points. Repeat the operation until the problem
is solved. If the problem cannot be resolved, contact the
after-sales service.
EXCESS OFFUEL
Decrease the percentage value by 5 points and try the
stove with the new calibration for at least half an hour. If
the problem is attenuated, but not solved, decrease by
another 5 points. Repeat the operation until the problem
is solved. If the problem cannot be resolved, contact the
after-sales service.
When the adjustment has been made, press button 1 to conform and escape.
N.B. Pellet feed adjustment carried out by the after-sales centre is not under warranty.
To Next Page
Loading...
