CLEANING
37
Chapter 11
CLEANING
Maintenance operations guarantee correct functioning of the product through time.
Failure to comply with these operations can jeopardise the safety of the product.
BRAZIER CLEANING
The brazier must be cleaned every day.
Remove the brazier from the relevant compartment and free the holes using the appropriate re irons
supplied.
remove the ash from the pot using a suction device
suck the ash deposited in the pot compartment
gure 11.1
ATTENTION!!!
Removal of the divider jeopardises
the safety of the product and leads
to the immediate voiding of the
warranty period. In the case of wear
or deterioration request after-sales
assistance for replacement of the
part (replacement that is not under
guarantee as the component is subject
to wear).
USING THE SCRAPERS
Cleaning of the heat exchangers guarantees constant heat output through time. This type of maintenance
must be performed at least once a day. To do this, just use the relevant scrapers positioned in the upper part
of the stove, making the high/low movement several times. The rods must be activated simultaneously.
gure 11.2
gure 11.3
To Next Page
Loading...
