Max300-LG : Description - Specifications - Installation Guide
Extrel
Core Mass Spectrometers
Page 11
by moving the switch on the right side of the pump’s power input box to the appropriate
setting.
NOTE: Other configurations, especially custom inlets, may require more extensive
changes to use another voltage.
Control Computer Specifications
The MAX300
™
-LG is controlled by Questor5 software running on a Windows PC
(Desktop or Laptop):
Operating System: Windows7 Pro or Windows10 Pro, 32bit or 64bit.
Memory: 2 GB (4 GB Recommended)
CPU: 1.7 GHz (Minimum)
Display: 1024 x 768 x 16 colors (Minimum)
Communications: (1) RS-232 serial port OR (1) USB 2.0 or above port with USB to
Serial Converter (Valve Control)
(Note: External communications options may require additional Serial/USB ports)
(1) USB port OR Ethernet port (Required for communication with
the instrument)
Hard Disk Space: The software itself will occupy about a 350 MB of disk space.
However, the databases that store the operating parameters and
data can grow quite large.
30 GB of free disk space may be considered the minimum for a
functional system.
Note: Extrel recommends that a control PC supplied by the user be dedicated to this
purpose and not be used for other tasks.
Installing the Software
If a control computer has been purchased from Extrel, the software will be pre-installed
and configured.
Please review the system requirements before attempting to install the software.
The installation media (Thumb drive / CD ROM) supplied with the MAX300
™
-LG
contains the software necessary to operate and control the mass spectrometer.
To Next Page
Loading...