Basic Access Point Configuration
AP-8432 Installation Guide 17
If this is the first time the management interface has been accessed, the Initial Setup
Wizard automatically displays.
The Introduction screen displays the various actions that can be performed using the
wizard under the
Function Highlight field.
Use the
Choose One type to Setup the Access Point field options to select the type of
wizard to run. The
Typical Setup is the recommended wizard. This wizard uses the
default parameters for most of the configuration and sets a working network with the
least amount of manual configuration.
The
Advanced Setup wizard is for administrators who prefer more control over the
different configuration parameters. A few more configuration screens are available for
customization when the Advanced Setup wizard is used.
The first page of the Initial Setup Wizard displays the
Navigation Panel and Function
Highlights for the configuration activities comprising the Access Point's initial setup. This
page also displays options to select the typical or advanced mode for the wizard.
NOTE
The Initial Setup Wizard displays the same pages and content for each Access
Point type supported. The only difference being the number of radios
configurable by Access Point, as models vary.
To Next Page
Loading...
