AP-8432 Access Point Specifications
AP-8432 Installation Guide 25
If the configuration displays as intended, select Save/Commit to implement these
settings to the Access Point’s configuration. If additional changes are warranted based
on the summary, either select the target page from the
Navigational Panel, or use the
Back and Next buttons to scroll to the target screen.
AP-8432 Access Point Specifications
Electrical Characteristics
An AP-8432 Access Point has the following electrical characteristics:
Physical Characteristics
An AP-8432 Access Point has the following physical characteristics:
Radio Characteristics
The AP-8432 Access Point has the following radio characteristics:
Operating Current &
Voltage
48VDC, 0.625A (AUX input voltage)
48VDC PWR-BGA48V45W0WW Power Supply
48VDC, 0.53A (POE)
802.3at AP-PSBIAS-2P3-ATR Power Injector
Dimensions 8.25 in. L x 8.25 in. W x 1.8 in. H
210 mm L x 210 mm W x 46 mm H
Weight 3.0 lbs/1.37 kg
Operating Temperature 32° F to 140° F/0° C to 60° C
Storage Temperature -40° F to 158° F/-40° C to 70° C
Operating Humidity 95% RH non-condensing
Operating Altitude
(maximum)
13,000 ft @ 28C
Storage Altitude
(maximum)
30,000 ft @ 12C
Electrostatic Discharge ESD to ±12KV air and ±8KV contact
Data Rates Supported 802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48 and 54 Mbps
802.11a: 6,9,12,18,24,36,48, and 54 Mbps 802.11n: MCS 0-31 up to
600Mbps
802.11ac: MCS 0-9 up to 1.733Gbps
Wireless Medium Direct Sequence Spread Spectrum (DSSS)
Orthogonal Frequency Division Multiplexing (OFDM)
Spatial multiplexing (MIMO)
Network Standards IEEE 802.11a/b/g/n/ac, MU-MIMO
802.11d and 802.11i WPA2
WMM and WMM-UAPSD
Transmit Power
Adjustment
1dB increments
To Next Page
Loading...
