Extreme Networks ExtremeSwitching VSP 7400 Series User Manual

GBIC, SFP (Mini-GBIC), QSFP+, XENPAK, and XFP Regulatory Compliance
Extreme Networks pluggable optical modules and direct-attach cables meet the following regulatory
requirements:
•
Class 1 or Class 1M Laser Product
•
EN60825-1:2007 2nd Ed. or later, European standard
•
FCC 21 CFR Chapter 1, Subchapter J in accordance with FDA & CDRH requirements
•
Application of CE Mark in accordance with 2004/108/EEC EMC Directive and the 2006/95/EC Low
Voltage Directives
•
UL and/or CSA registered component for North America
•
47 CFR Part 15, Class A when installed into Extreme products
Industry Canada Notice
CAN ICES-3 (A)/NMB-3(A)
This digital apparatus does not exceed the class A limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables
aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique
édicté par le ministère des Communications du Canada.
Class A ITE Notice
Warning
This equipment is compliant with Class A of CISPR 32. In a residential environment this
equipment may cause radio interference.
Korea EMC Statement
Australia (RCM)
Warning
This equipment is compliant with Class A of CISPR 32. In a residential environment this
equipment may cause radio interference.
Safety and Regulatory Information
VSP 7400 Series Switches: Hardware Installation Guide 81

Extreme Networks ExtremeSwitching VSP 7400 Series Specifications

General

Brand	Extreme Networks
Model	ExtremeSwitching VSP 7400 Series
Category	Switch
Language	English