Need help?Do you have a question about the Extreme Networks ExtremeSwitching X440-G2-48p-10GE4 and is the answer not in the manual?
General| Model | X440-G2-48p-10GE4 |
|---|---|
| Product Family | ExtremeSwitching |
| Product Type | Switch |
| Manageable | Yes |
| Port Count | 48 |
| Port Type | 10/100/1000BASE-T |
| 10GE Ports | 4 |
| PoE+ | Yes |
| PoE Budget | 740W |
| Switching Capacity | 176 Gbps |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9216 bytes |
| Input Voltage | 100-240V AC |
| Uplink Ports | 4 x 10GbE SFP+ |
| MAC Address Table Size | 32000 |
| Operating Temperature | 0°C to 45°C |
| Form Factor | 1U rack-mountable |
| Management | SNMP, CLI, Web-based management |
Lists compatible external power supply models for redundancy and PoE support.
Steps and considerations for planning the installation site to maximize performance.
Procedures for properly grounding the equipment rack for safety and stability.
Guidelines and considerations for planning stack configurations, including switches and cables.
Software configuration guidelines for stacks, including licensing and node roles.
Step-by-step guide for physically connecting switches using stacking cables.
General safety precautions and ESD controls to follow before installing or removing a switch.
Step-by-step instructions for mounting the switch in a rack or cabinet.
Procedures for installing internal power supplies into compatible switch models.
Steps to connect the switch to an AC or DC power source.
Safety warnings and precautions for installing external power supplies.
Tools and equipment needed for installing external power supplies.
Step-by-step guide for removing and installing fan modules.
Procedures for safely removing a switch from a rack or cabinet.
To Next Page