Need help?Do you have a question about the Extreme Networks ExtremeSwitching X435-8P-4S and is the answer not in the manual?
General| Model | X435-8P-4S |
|---|---|
| Product Type | Switch |
| Manageable | Yes |
| PoE | Yes |
| PoE Budget | 240W |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| VLANs Supported | 4094 |
| AC Input Voltage | 100-240 VAC |
| AC Input Frequency | 50/60 Hz |
| Ports | 8 x 10/100/1000BASE-T, 4 x 10G SFP+ ports |
| MAC Address Table Size | 32, 000 |
| Jumbo Frame Support | 9, 216 Bytes |
| Power Supply | Internal |
| Dimensions (W x D x H) | 440 x 250 x 43 mm |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% non-condensing |
Outlines the comprehensive security management features provided by these switches.
Explains how X440-G2 switches can be stacked using SummitStack-V and compatible cables.
Explains how X620 switches can be stacked using SummitStack-V and compatible cables.
Ensures the site meets all environmental and safety requirements, considering building codes.
Emphasizes the need for a temperature-controlled environment for performance and safety.
Outlines measures to ensure optimum system performance by protecting against static electricity.
Covers requirements and precautions for powering hardware, including PoE devices and supplies.
Explains the SummitStack feature and basic principles of combining switches into a stack.
Details the steps for creating the physical stack, including connecting switches and cables.
Provides examples and recommended orders for connecting stack ports to form a ring.
Lists available stacking cable types verified by Extreme Networks for compatibility.
Provides crucial safety information to review before attempting switch installation or removal.
Details how to attach switches to two-post racks, four-post racks, or cabinets using mounting brackets.
Provides instructions for installing one or two internal power supplies into a switch.
Explains how to connect AC and DC power cords to turn on the switch.
Guides on initial setup and configuration, including connecting to a console and logging in.
Provides steps for the initial login process after the switch has completed power-on self-tests.
Details how to configure the switch's IP address for the management virtual LAN (VLAN).
Outlines the steps to download and configure the ExtremeXOS software on the switch.
Provides safety warnings and precautions for installing Extreme Networks switches and components.
Details the process of installing Summit 750 W AC power supplies into the EPS-C2 chassis.
Provides instructions for installing the RPS-150XT power supply on a flat surface or in a rack.
Describes how to install the RPS-500p power supply on a flat surface or in a 19-inch rack.
Details installing the STK-RPS-150PS as a standalone unit or in an RPS shelf.
Provides instructions for installing the STK-RPS-1005PS power supply on a flat surface or in a rack.
Provides step-by-step instructions for removing and installing a fan module.
Describes procedures for removing or replacing V300 Virtual Port Extenders.
Explains how to replace VIMs, SSDs, or clock modules in X460-G2 and X465 series switches.
Provides steps to remove an AC power supply unit (PSU) from a switch.
Details procedures for removing a DC power supply unit (PSU) from a switch.
Outlines steps to safely remove a switch from a rack after disconnecting power.
Details technical specifications for the X440-G2 Series switches, including dimensions and weight.
Lists technical specifications for the X450-G2 Series switches, covering dimensions and weight.
Provides detailed technical specifications for the X460-G2 Series switches, including power and environmental data.
Details technical specifications for the X465 Series switches, including dimensions, weight, and power options.
Provides general guidelines for safe installation practices, including lifting and tool usage.
Outlines recommendations for performing maintenance procedures safely on Extreme Networks equipment.
Details safety warnings for optical devices, including laser optic module handling.
Provides guidelines for installing power supplies and connecting power safely.
To Next Page