Need help?Do you have a question about the Extreme Networks ExtremeSwitching X440-G2 Series and is the answer not in the manual?
General| Form Factor | Rack-mountable |
|---|---|
| VLAN Support | Yes |
| Humidity | 5% to 95% non-condensing |
| Model | X440-G2 Series |
| Port Type | Gigabit Ethernet |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| Stacking | Yes, up to 8 switches |
| Layer Support | Layer 2/3 |
| Operating Temperature | 0°C to 50°C |
| Product Type | Switch |
| Jumbo Frames | 9216 bytes |
| AC Power Supply | 100-240 VAC, 50-60 Hz |
| Storage Temperature | -40°C to 70°C |
| Port Configuration | 24 or 48 ports |
| Power over Ethernet (PoE) | Optional |
Target audience for the installation guide.
Discusses text conventions used throughout the guide.
Provides contact methods and information for technical assistance.
Lists resources for product documentation and training.
Describes ExtremeSwitching switches and their general features.
Explains combination ports and automatic failover capabilities.
Details how QSFP28 and QSFP+ ports can be partitioned.
Introduces cost-effective campus edge switches with various port configurations.
Describes switches offering high-density fast or Gigabit Ethernet connectivity.
Details switches providing high-density fast or Gigabit Ethernet connectivity.
Introduces 10 Gb datacenter aggregation switches with 100 Gb uplinks.
Describes compact 10 Gb Ethernet switches for 10 Gb edge applications.
Details switches with 48 or 72 front-panel Ethernet ports for 10-gigabit connectivity.
Introduces 10 Gb datacenter aggregation switches with 100 Gb uplinks.
Describes switches with 32 front-panel Ethernet ports for 40-gigabit Ethernet connectivity.
Introduces 100 Gb switches suited for large datacenter applications.
Explains how to stack X440-G2 switches using SummitStack-V.
Lists switches using external power supplies for redundancy.
Discusses switches with internal power supplies that can be replaced.
Provides detailed specifications for the EPS-C2 redundant power supply.
Provides detailed specifications for the RPS-150XT redundant power supply.
Lists specifications for the RPS-500p redundant power supply.
Details specifications for STK-RPS-150PS and RPS shelves.
Provides specifications for the STK-RPS-1005PS redundant power supply.
Lists specifications for the VX-RPS-1000 redundant power supply.
Outlines the process for planning the installation site.
Details environmental and safety requirements for the installation site.
Provides guidelines for selecting and preparing equipment racks.
Covers assessing and meeting the site's cable infrastructure needs.
Details power supply and connection requirements for the equipment.
Introduces the concept of stacking switches using SummitStack.
Provides guidance on planning the physical layout and components for a stack.
Offers best practices for physically situating switches in a stack.
Lists and describes available stacking cables and their compatibility.
Provides critical safety precautions before installing switches.
Lists necessary tools, materials, and personnel for installation.
Instructions for physically mounting the switch in a rack or cabinet.
Instructions for installing internal power supplies if not already present.
Steps for connecting AC or DC power to the switch.
Steps for initial setup, console connection, and basic configuration.
Crucial safety warnings for installing power supplies.
Details the installation of the EPS-C2 redundant power system.
Provides instructions for installing the RPS-150XT power supply.
Guides on installing the RPS-500p redundant power supply in a rack or flat surface.
Details installing the STK-RPS-150PS in an RPS shelf or as a standalone unit.
Guides on installing the STK-RPS-1005PS redundant power supply.
Covers installing the VX-RPS-1000 power supply for V400 Virtual Port Extenders.
Instructions for installing the V400 Virtual Port Extender.
Details installation options for the converter.
Describes installing VIMs or clock modules in X460-G2/X465 switches.
Guides on installing a Solid-state Drive (SSD) module in a switch.
Step-by-step instructions for replacing a 300 W AC power supply.
Procedures for replacing 350 W or 715 W AC power supplies.
Instructions for replacing a 550 W AC power supply.
Details the process for replacing a 750 W AC power supply.
Guides on replacing a 770 W AC power supply.
Instructions for replacing an 1100 W AC power supply.
Steps to remove an installed RPS-150XT.
Procedures for removing an installed RPS-500p.
Steps to remove an installed STK-RPS-150PS.
Procedures for removing an installed STK-RPS-1005PS.
Guides on removing an installed VX-RPS-1000.
Step-by-step guide for replacing a 300 W DC power supply.
Procedures for removing a 300 W DC power supply.
Instructions for installing a new 300 W DC power supply.
Guides on replacing a 550 W DC power supply.
Procedures for removing a 550 W DC power supply.
Instructions for installing a new 550 W DC power supply.
Details the replacement of a 750 W internal DC power supply.
Procedures for removing a 750 W DC power supply.
Instructions for installing a new 750 W DC power supply.
Guides on replacing an 1100 W DC power supply.
Procedures for removing an 1100 W DC power supply.
Instructions for installing a new 1100 W DC power supply.
Lists tools and requirements before replacing fan modules.
Details airflow direction considerations for fan modules.
Step-by-step guide for replacing a fan module.
Procedures for removing or replacing the V400 Virtual Port Extender.
Guides on replacing the Half-Duplex to Full-Duplex Converter.
Instructions for replacing VIMs, SSDs, or clock modules in specific switches.
Steps to remove an AC power supply unit from a switch.
Procedures for removing a DC power supply unit from a switch.
Instructions for safely removing a switch from a rack.
Provides technical specifications for X435 series switches.
Details the technical specifications for X440-G2 series switches.
Lists technical specifications for X450-G2 series switches.
Provides technical specifications for X460-G2 series switches.
Details technical specifications for X590 series switches.
Lists technical specifications for X620 series switches.
Provides technical specifications for X670-G2 series switches.
Details technical specifications for X690 series switches.
Lists technical specifications for X695 series switches.
Provides technical specifications for X770 series switches.
Details technical specifications for X870 series switches.
Lists technical specifications for the V400 Virtual Port Extender.
Provides technical specifications for the converter.
To Next Page