Need help?Do you have a question about the Extreme Networks ExtremeSwitching X435 Series and is the answer not in the manual?
General| Product Type | Switch |
|---|---|
| Layer | Layer 2/3 |
| Manageable | Yes |
| Jumbo Frames | 9216 bytes |
| Model | X435 Series |
| Power over Ethernet (PoE) | Available on some models (PoE+) |
| Management | ExtremeXOS |
| Form Factor | Rack-mountable |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
Contact Extreme Networks for assistance using the Extreme Portal or by phone.
Describes the ExtremeSwitching switches and summarizes the features available in each series.
Allows configuration of QSFP28 and QSFP+ ports as single or multiple, partitioned ports.
Details the internal, non-FRU power supplies for X435 Series switches and PoE models.
Specifies operating temperature ranges for 8-port and 24-port X435 switch models.
Details the comprehensive security management features provided by these switches.
Explains SummitStack-V stacking capabilities and connectivity for X440-G2 switches.
Details the ports and slots for the X450-G2-24t-GE4 model.
Describes the meanings of the LEDs on the X450-G2 series switches.
Lists available VIM options for X460-G2 series switches.
Details the ports and slots for the X460-G2-24t-GE4 switch model.
Describes how to connect a terminal or PC for local management via console or Ethernet.
Details the power supply options and airflow requirements for X465 series switches.
Explains how X590 switch ports can be configured for 100-gigabit or 40-gigabit mode.
Details the ports and slots for the X590-24t-1q-2c switch model.
Describes SummitStack-V stacking capabilities for X620 switches.
Details the ports and slots for the X620-8t-2x switch model.
Details the ports and slots for the X670-G2-48x-4q switch model.
Describes the meanings of the LEDs on the X670-G2 series switches.
Explains how X690 switch ports can be configured for 100-gigabit or 40-gigabit mode.
Details the ports and slots for the X690-48t-2q-4c switch model.
Details port partitioning and channelizing options for X695 switches.
Describes the meanings of the LEDs on the front panel of the X695 switch.
Explains how X870 switch ports can be configured for 100-gigabit or 40-gigabit mode.
Details the ports and slots for the X870-32c switch model.
Provides installation instructions for V300 Virtual Port Extender models.
Describes the LRM/MACsec Adapter for increased flexibility and security.
Details SSD module support for X465 Series switches.
Provides guidelines for connecting network cables, including fiber optic and UTP.
Outlines requirements and precautions for powering hardware.
Explains the basics of stacking switches and the SummitStack feature.
Provides steps for creating a physical stack, connecting switches, and cables.
Lists available stacking cables verified by Extreme Networks for compatibility.
Provides crucial safety information before installing or removing switches.
Details how to attach switches to two-post racks, four-post racks, or cabinets.
Provides instructions for installing internal power supplies in switches.
Outlines safety precautions for service personnel installing power supplies.
Details the installation of Summit 750 W AC power supplies into the EPS-C2 chassis.
Provides instructions for installing the RPS-150XT power supply.
Provides instructions for replacing Summit 300 W AC power supplies.
Details the procedure for replacing Summit 450 W or 550 W AC power supplies.
Describes the steps for replacing a 750 W AC power supply.
Provides instructions for replacing Summit 300 W DC power supplies.
Details the procedure for replacing Summit 450 W or 550 W DC power supplies.
Describes how to remove and replace a 750 W DC power supply.
Lists the tools and precautions needed before replacing a fan module.
Provides step-by-step instructions for replacing a fan module in a switch.
Details the steps to remove an AC power supply unit (PSU) from a switch.
Provides instructions for safely removing a switch from a rack.
Provides detailed technical specifications for the X435 Series switches.
Details technical specifications for the X440-G2 Series switches.
Provides technical specifications for the X450-G2 Series switches.
Details technical specifications for the X460-G2 Series switches.
Provides technical specifications for the X465 Series switches.
Details technical specifications for the X590 Series switches.
Provides technical specifications for the X620 Series switches.
Details technical specifications for the Summit X670-G2 Series switches.
Provides technical specifications for the X690 Series switches.
Details technical specifications for the X695 Series switch.
Provides technical specifications for the X870 Series switches.
Lists physical, power, and environmental specifications for V300 models.
Provides physical, power, and environmental specs for V400 Virtual Port Extenders.
Details packaged dimensions, power, environmental data, and safety standards.
Provides specs for converter dimensions, power, environmental data, and standards.
Lists physical, power, and environmental specs for Summit 300 W AC/DC PSUs.
Details physical, AC, DC power, and environmental specs for Summit 550 W PSUs.
Provides specs for 750 W AC/DC power supplies and environmental data.
Lists physical, power, and environmental specs for Summit 770 W PSUs.
Details AC and DC power supply specs for Summit 1100 W models.
Provides physical and power specs for the 2000 W AC power supply.
Lists specifications for the EPS-C2 redundant power supply unit.
Details specifications for the 150 W RPS-150XT Redundant Power Supply unit.
Provides specifications for the 500 W DC RPS-500p redundant power supply.
Lists specifications for the 1005 W PoE+ Redundant Power supply unit.
Provides specifications for the VX-RPS-1000 Redundant Power Supply.
Lists specifications for the 3-slot modular shelf models.
Describes the pinouts for DB-9 and RJ45 console ports.
Lists factors to consider before installing equipment in a Telco environment.
Provides essential safety guidelines for handling and installing equipment.
Offers recommendations for performing maintenance on Extreme Networks equipment.
Details requirements for LAN system cable routing, including intra-building connections.
Provides warnings and recommendations for installing power supplies.
Explains how to purchase and select appropriate AC power cords.
Provides country-specific EMC warnings and statements.
To Next Page