Need help?Do you have a question about the Extreme Networks ExtremeSwitching 5320 Series and is the answer not in the manual?
General| Category | Switch |
|---|---|
| Layer Support | Layer 2/3 |
| Operating System | ExtremeXOS |
| Jumbo Frames | 9216 bytes |
| VLANs | 4094 |
| Product Series | ExtremeSwitching |
| Model | 5320 Series |
| Management | CLI, SNMP, Web |
| Features | Advanced QoS, ACLs, IPv4/IPv6 support |
| Mounting | Rack mountable |
| Stacking | Up to 8 units |
| Operating Temperature | 0°C to 45°C |
| Port Types | 100/1000BASE-T, SFP/SFP+ |
| Power over Ethernet (PoE) | Optional (PoE+ models available) |
Identifies the intended users of this installation guide.
Explains formatting conventions, icons, and text styles used in the document.
Lists resources for acquiring product information and training courses.
Provides contact methods and resources for technical assistance.
Describes switch management interfaces, including console and Ethernet ports.
Details the switch's stacking interfaces and their functionality.
Specifies the operating temperature ranges for different 5320 Series models.
Details the front panel components of the 5320-48T-8XE switch model.
Details the front panel of the 5320-24T-4X-XT switch model.
Details the front panel of the 5320-24T-24S-4XE-XT switch model.
Describes the LRM/MACsec Adapter for expanding switch capabilities.
Details the adapter's capacity based on switch model and connection.
Explains the meaning of the LEDs on the LRM/MACsec Adapter.
Outlines the essential steps for planning the installation site.
Specifies environmental and safety requirements for the installation.
Details measures to protect the system from static electricity.
Covers requirements for powering the network hardware.
Details UPS requirements and functions for power protection.
Explains the fundamental concepts and benefits of switch stacking.
Guides on planning the physical makeup and components of a switch stack.
Provides guidance on software configuration for switch stacks.
Details the steps required to physically assemble a switch stack.
Instructions for connecting the switch stack to the management network.
Crucial safety precautions to follow before installing the switch.
Details the various options for mounting the switch.
Provides step-by-step instructions for rack mounting the switch.
Procedures for installing an external redundant power supply.
Instructions for connecting network cables to switch ports.
Procedures for powering on the switch after installation.
Steps to connect a management console to the switch.
Initial login procedure for the Switch Engine operating system.
Setting up VLAN and Virtual Router for local management.
Procedures for safely removing a device from a two-post rack.
Steps to safely disconnect RPS power cables.
Explains the front panel LED indicators for 5320 Series switches.
Details the LED indicators on the external redundant power supply.
Details the ports and connectors for each 5320 Series switch model.
Provides physical dimensions and weight for switches and rack mount kits.
Lists detailed specifications for various AC and DC power supplies.
Data on power usage and heat output for different switch models.
Details the pinouts for console connectors and adapters.
Key factors to consider prior to installing equipment.
Provides general guidelines for safe handling and installation.
Instructions for installing and connecting power supply units.
Warnings related to electromagnetic compatibility.
To Next Page