To Next Page

To Previous Page

non-fabric mode. When used as Ethernet ports, the U1 and U2 ports can support data

rates of 10Gb using SFP+ optics.

Note

5320-24T-4X-XT and 5320-24T-24S-4XE-XT switches can only be stacked with

themselves.

Stacking cables are ordered separately.

For information about optical modules, see the Extreme Optics website.

For information about stacking, see Build Stacks on page 41.

Operating Temperatures

All 5320 Series switch models support an operating range from 0°C (32°F) to 50°C

(122°F). The 5320-16P-4XE models, both AC and DC, and fan off, support an operating

range from 0°C (32°F) to 35°C (95°F). Models 5320-24T-4X-XT and 5320-24T-24S-4XE-XT

support an extended range from 0°C (32°F) to 60°C (140°F).

Feature Licensing

Note

FabricEngine does not support models 5320-24T-4X-XT and 5320-24T-24S-4XE-

XT.

The 5320 Series switches support Unied Licensing, so that you can use them with

multiple operating systems. There are two methods of acquiring feature licenses:

manual or through ExtremeCloud IQ™ (XIQ).

For SwitchEngine licensing, see the

Feature License Requirements

for your version of

the SwitchEngine software.

For FabricEngine licensing, see the Licensing chapter in the Fabric Engine User Guide

for your version of the FabricEngine operating system.

For XIQ licensing, see

ExtremeCloud IQ

5320-48T-8XE Switch Features

The front panel of the switch includes:

1 = Serial console port (RJ-45)

2 = USB Type-A port

3 = USB Micro-B console port

4 = 48 x 10/100/1000BASE-T (autosensing) MACsec capable ports

Note

The 10/100 ports support half duplex; the 1000 port supports full duplex. Half-

duplex is not supported on these ports when operating at 1Gbps.

Operating Temperatures ExtremeSwitching 5320 Series Overview

14 ExtremeSwitching 5320 Series Hardware Installation Guide

Extreme Networks ExtremeSwitching 5320 Series User Manual

Questions and Answers: