Need help?Do you have a question about the Extreme Networks ExtremeSwitching 5520-48T and is the answer not in the manual?
General| Model | 5520-48T |
|---|---|
| Product Type | Switch |
| Port Count | 48 |
| Port Type | 10/100/1000Base-T |
| Uplink Ports | 4 x 10G SFP+ |
| Form Factor | Rack-mountable |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| MAC Address Table Size | 32, 000 |
| VLANs Supported | 4094 |
| Jumbo Frame Support | Yes |
| Redundant Power Supply | Optional |
| Features | sFlow |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Relative Humidity | 10% to 90% non-condensing |
| Management | ExtremeXOS |
Crucial safety guidelines before and during switch installation, including ESD precautions.
Step-by-step instructions for physically mounting the switch into racks or cabinets.
Procedures for installing the switch's internal AC power supply units.
How to establish a serial connection to the switch for initial configuration and management.
Instructions for installing various V300 Virtual Port Extender models in different mounting configurations.
Instructions for installing V400 Virtual Port Extender models in standard equipment racks.
Procedures for installing VIM modules into the dedicated front slot of a 5520 Series switch.
Broad safety guidelines applicable to all installations, including lifting and rack loading.
To Next Page