Need help?Do you have a question about the Extreme Networks ExtremeSwitching 5420 Series and is the answer not in the manual?
General| Product Type | Switch |
|---|---|
| Layer Support | Layer 2/3 |
| Stackable | Yes |
| Humidity | 5% to 95% non-condensing |
| Jumbo Frame Support | 9, 216 bytes |
| Management | SNMP |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| AC Power Supply | 100-240V AC, 50-60Hz |
| VLANs | 4094 |
| Security Features | 802.1X |
| Warranty | Lifetime |
| Power over Ethernet (PoE) | 802.3at (PoE+), 802.3bt (PoE++) on select models |
Identifies the intended audience and explains document conventions and text formatting.
Provides methods for giving feedback and obtaining technical assistance.
Details switch management interfaces (console, Ethernet) and cooling mechanisms.
Covers power supply options and the stacking feature for connecting multiple switches.
Specifies operating temperature ranges and the unified feature licensing model.
Describes the front and rear panel components and specifications of the 5420F-8W-16P-4XE model.
Details the front and rear panel components and specifications of the 5420F-24P-4XE model.
Describes the front and rear panel components and specifications of the 5420F-24S-4XE model.
Details the front and rear panel components and specifications of the 5420F-24T-4XE model.
Describes the front and rear panel components and specifications of the 5420F-16MW-32P-4XE model.
Details the front and rear panel components and specifications of the 5420F-16W-32P-4XE model.
Describes the front and rear panel components and specifications of the 5420F-48P-4XE model.
Details the front and rear panel components and specifications of the 5420F-48P-4XL model.
Describes the front and rear panel components and specifications of the 5420F-48T-4XE model.
Details the front and rear panel components and specifications of the 5420M-24T-4YE model.
Describes the front and rear panel components and specifications of the 5420M-24W-4YE model.
Details the front and rear panel components and specifications of the 5420M-16MW-32P-4YE model.
Describes the front and rear panel components and specifications of the 5420M-48T-4YE model.
Details the front and rear panel components and specifications of the 5420M-48W-4YE model.
Details the specifications, physical attributes, and environmental data for the 150W AC PSU.
Provides specifications and environmental data for the 600W AC PoE PSU.
Details specifications and environmental data for the 920W AC PoE PSU.
Covers specifications and environmental data for the 1200W AC PoE PSU.
Provides specifications and environmental data for the 2000W AC PoE PSU.
Covers site planning, environmental controls, building codes, and ESD protection.
Details rack specifications, cable installation, routing, labeling, and RFI prevention.
Outlines power supply, cord, PoE, and UPS requirements for equipment installation.
Introduces stacking concepts, basic stacks, topologies, and terminology.
Guides on planning stack creation, configuration, and switch placement.
Steps for connecting switches, cables, and management network for physical stack formation.
Covers essential safety precautions and necessary tools/materials for switch installation.
Details attaching the switch to racks/cabinets and installing optional components.
Instructions for installing AC power supplies and connecting network interface cables.
Procedures for turning on the switch and connecting network interface cables.
Guides on connecting to the management console and performing the initial login on EXOS or VOSS.
Covers IP address configuration, VLAN setup, and changing the switch OS.
Step-by-step instructions for safely removing and replacing a 150W AC power supply.
Procedures for replacing 600W, 920W, 1200W, or 2000W AC PoE power supplies.
Outlines pre-installation requirements and critical airflow direction guidelines.
Provides detailed steps for removing and installing a fan module in the switch.
Explains the status LEDs on the front panel for system, PSU, speed, stacking, fan, and locator functions.
Details port LED behavior in SYS, SPD, and STK modes, and management port indicators.
Provides unpackaged and packaged dimensions and weights for various 5420 models.
Covers fan speed, acoustic noise, and power supply options for 5420 series switches.
Lists Mean Time Between Failures (MTBF), CPU/Memory details, and applicable safety/environmental standards.
Detailed technical specifications for 150W, 600W, 920W, 1200W, and 2000W AC/PoE power supplies.
Specifies power cord requirements and console connector pinout details.
Guidelines for selecting an installation site and general safety precautions during installation.
Safety measures for maintenance, handling fiber optics, and cable routing.
Covers power supply installation, cord selection, and regulatory compliance for modules and systems.
Includes battery notices, EMC warnings, and country-specific compliance statements.
To Next Page
