Extreme Networks ExtremeSwitching 5420 Series User Manual

Installing Your Switch
Safety Considerations for Installing Switches on page 75
What You Will Need for the Installation on page 75
Attaching the Switch to a Rack or Cabinet on page 76
Installing Optional Components on page 77
Installing Internal AC Power Supplies on page 78
Turn on the Switch on page 80
Connecting Network Interface Cables on page 80
Before you attempt to install or remove an Extreme Networks switch, read the precautions in Safety
Considerations for Installing Switches on page 75.
Extreme Networks switches fit into standard 19-inch equipment racks.
A four-post rack-mounting kit is provided with the switch. A two-post kit can be ordered separately.
The installation process includes the following tasks:
1. Prepare to install the switch.
See What You Will Need for the Installation on page 75.
2. Install the switch in the rack.
See Attaching the Switch to a Rack or Cabinet on page 76.
3. Install optional components: optical transceivers and cables.
See the instructions in Installing Optional Components on page 77.
4. If your switch does not come with an installed internal power supply, install one or two power
supplies.
See Installing Internal AC Power Supplies on page 78.
5. Power up the switch.
See Turn on the Switch on page 80.
6. Connect network interface cables.
See Connecting Network Interface Cables on page 80.
7. Perform initial network connection and configuration.
See Activating and Verifying the Switch on page 82.
74
ExtremeSwitching 5420 Series Hardware Installation Guide

Extreme Networks ExtremeSwitching 5420 Series Specifications

General

Brand	Extreme Networks
Model	ExtremeSwitching 5420 Series
Category	Switch
Language	English