Extreme Networks ExtremeSwitching 5420 Series User Manual

Figure 4: 5420F-24P-4XE Rear Panel
1 = Grounding lug 3 = AC power inlet connector
2 = Fixed fan modules 4 = Power supply slot
5420F-24S-4XE Switch Features
The front panel of the 5420F-24S-4XE switch includes:
• 24 100/1000BASE-X SFP MACsec capable ports (unpopulated)
Note
Half-duplex is not supported on these ports when operating at 1Gbps.
• 4 1/10Gb SFP+ MACsec capable uplink ports (unpopulated)
• 2 Stacking/SFP-DD ports (unpopulated)
• 1 Serial console port (RJ-45)
• 1 10/100/1000BASE-T out-of-band management port
• 2 USB Type-A ports for management or external flash
• 1 USB Micro-B console port
Figure 5: 5420F-24S-4XE Front Panel
1 = 100/1000BASE-X ports 4 = 10/100/1000BASE-T out-of-band
management port
7 = SFP-DD stacking
ports
2 = Mode button 5 = RJ-45 serial console port 8 = 1/10G SFP+ ports
3 = USB Micro-B console port 6 = USB Type-A ports
The rear panel of the switch includes:
• 2 fixed fan modules
• Grounding lug
5420F-24S-4XE Switch Features
ExtremeSwitching 5420 Series Overview
16 ExtremeSwitching 5420 Series Hardware Installation Guide

Extreme Networks ExtremeSwitching 5420 Series Specifications

General

Brand	Extreme Networks
Model	ExtremeSwitching 5420 Series
Category	Switch
Language	English